Stainless Steel 316 Coil Tubes suppliers
Chemical Composition of SS 316 Coiled Tubing:
Stainless Steel 316 Coil Tubes suppliers
| SS | 316 |
| Ni | 10 – 14 |
| N | 0.10 max |
| Cr | 16 – 18 |
| C | 0.08 max |
| Si | 0.75 max |
| Mn | 2 max |
| P | 0.045 max |
| S | 0.030 max |
| Mo | 2.00 – 3.00 |
Mechanical Properties of SS 316 Coiled Tubing:
| Grade | 316 |
| Tensile Strength (MPa) min | 515 |
| Yield Strength 0.2% Proof (MPa) min | 205 |
| Elongation (% in 50mm) min | 40 |
| Hardness | |
| Rockwell B (HR B) max | 95 |
| Brinell (HB) max | 217 |
Additional Information
| Packaging Details | Stainless Steel 316 Coil Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316 Coil Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316 Coil Tubes with all necessary documents such as commercial invoice/ packing list/ Test Reports/ HS Code/ Country of Origin attested by the chamber of commerce/ Fumigation Certificate/ Warranty Letter/ and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 316 Coil Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost. |
Write your message here and send it to us
